Things to Consider Before Contacting a Local Furnace Company for an Emergency Situation Concerning y
PreviousA Complete Guide on Heating System Replacements Including Prices, Advantages & Disadvantages
Last updated
Was this helpful?
Last updated
Was this helpful?
It's a freezing winter season day and you get up to a cold home. You soon find that the heating unit isn't working! Your very first idea is to call for emergency heater repair work.
Before you grab your phone, you can take a couple of basic steps to see if you may have the ability to solve the concern on your own. This may help correct the issue quicker and without the expenditure of a possibly unnecessary emergency situation heater repair call.
1. Inspect your thermostat.
- Make sure that the thermostat is on and set to "heat." This sounds apparent, but you wouldn't think the number of service calls take place because the house owner didn't know that someone (like a guest or kid) adjusted the settings!
- If your thermostat has a fan setting, set it to "vehicle" rather of "on." Otherwise, the fan might blow continuously even when the air isn't being heated.
- If the room temperature is lower than the thermostat setting, try changing the setting up a few degrees to see if the furnace begins.
2. Make certain you have power to the furnace.
Even if you have a gas heating system, a disturbance in electric power will disrupt your furnace from producing heat. You may have a circuit breaker that has tripped.
If that holds true, you can reset it by turning the circuit all the way off and after that on once again. If the circuit right away breaks again, call an expert.
3. Check your air filter.
An air filter that is exceptionally clogged up will not allow the air to be warmed effectively. It might trigger your heater to get too hot and shut down.
4. If you have a gas heating system, make sure the gas supply is on.
If you have actually had any repairs done lately, someone might have shut down the gas supply valve and then forgot to turn it back on. Or, the gas company might have closed down the gas lines for upkeep. A quick talk to the gas company is a good concept if you think this might be the case.
- Check the gas valve at the gas business's meter.
- Check the gas valve on your furnace. Your heating system's gas valve is on when the manage is inline (parallel) with the pipeline. If it's off, the handle will be perpendicular to the pipeline.
If you smell gas, switch off the supply and right away call a professional.
5. Check the ignition source or pilot burner.
Most contemporary furnaces have actually an igniter combined with a flame sensing unit rather than a physical pilot burner. Both of these can wear and require repair. In fact, ignitor and flame sensor problems are a few of the most common furnace repair work we encounter.
If you have an older heating system, your system might have a physical pilot burner. A draft or interruption in gas service can trigger the pilot light to go out. If your pilot burner is out, and you have actually currently verified that you have a safe gas supply, attempt relighting it according to your owner's handbook. (This is usually finished with a fireplace match or long barbeque-style lighter.).
If you're not comfy with this, or the pilot light won't remain lit, call a technician.
Remove the filter and hold it against the light. Can't see any light through it? Replace it. We advise examining your furnace filter every month and changing as needed.